Further to my last post, Here is a brief summary of this blog’s various poll results that relate in some way to Ribbon and CIP use. The most recent polls are at the top of the list. I have placed in bold those percentages that relate directly to the proportion of AutoCAD Ribbon use among the voters on this blog.
- AutoCAD 2010 users’ Ribbon use: 44% (AutoCAD 2010 users’ CIP on: 36%)
- Ribbon love: 28%
- AutoCAD 2010 menu bar non-users: 23%
- Inventor Ribbon use: 44% (Inventor 2010 users’ Ribbon use: 59%)
- Revit Ribbon use: 42% (Revit 2010 users’ Ribbon use: 58%)
- AutoCAD Ribbon use: 32% (AutoCAD 2009/2010 users’ Ribbon use: 38%)
- CIP on: 27%
- AutoCAD 2009 menu bar non-users: 21%
- AutoCAD 2009 Ribbon one of 3 best new features: 11%
- AutoCAD 2009 Ribbon turned on in some way: 29% (fully visible 13%)
The polls were run at different times over the past couple of years with different questions being asked in different ways about different releases, and responded to by very different numbers of voters. Don’t expect consistent or directly comparable results; this is not a scientific study. As with all polls here, there is a self-selection bias; those people who feel most strongly about a subject are more likely to find these polls and make the effort to vote in them.
The more recent polls generally have significantly greater sample size than the early ones. The smallest poll (AutoCAD 2009 best new features) has 37 voters, the largest poll (AutoCAD users generally using Ribbon) has 751. While the former certainly qualifies as Shaan’s “a few dozen”, the latter does only if you consider 62 to be “a few”. In which case, can I give you a thousand dollars and you give me a few hundred back?
Here are the poll details, which you can also see in the Polls Archive. If you think any of these questions or the available responses are in any way biased or leading , I’d be interested to hear your reasoning.
AutoCAD 2010 users, what are your Ribbon and CIP settings?
Start Date: 15 March 2010
Ribbon on, CIP on (24.7%, 65 Votes)
Ribbon on, CIP off (19.4%, 51 Votes)
Ribbon off, CIP on (11%, 29 Votes)
Ribbon off, CIP off (44.9%, 118 Votes)
Ribbon
Start Date: 16 January 2010
Love (28.2%, 164 Votes)
Hate (71.8%, 417 Votes)
AutoCAD 2010 users: pull-down menus – is your menu bar turned on (MENUBAR=1)?
Start Date: 14 September 2009
Yes, it’s on all the time (69.3%, 475 Votes)
Yes, it’s usually on but I sometimes turn it off (4.1%, 28 Votes)
Yes in verticals, no in AutoCAD (1.9%, 13 Votes)
Yes (other) (1.5%, 10 Votes)
No, it’s usually off but I sometimes turn it on (7%, 48 Votes)
No, I never use pull-downs (13.7%, 94 Votes)
No (other) (2.5%, 17 Votes)
Inventor users: are you generally using the Ribbon?
Start Date: 11 September 2009
Yes (44.3%, 82 Votes)
No (using 2010) (30.8%, 57 Votes)
No (using an earlier release to avoid the Ribbon) (15.7%, 29 Votes)
No (using an earlier release for other reasons) (9.2%, 17 Votes)
Revit users: are you generally using the Ribbon?
Start Date: 9 September 2009
Yes (41.6%, 153 Votes)
No (using 2010 in unsupported classic mode) (30.2%, 111 Votes)
No (using an earlier release to avoid the Ribbon) (20.4%, 75 Votes)
No (using an earlier release for other reasons) (7.9%, 29 Votes)
AutoCAD users: are you generally using the Ribbon?
Start Date: 9 September 2009
Yes (32%, 240 Votes)
No (using 2009/10) (51.1%, 384 Votes)
No (using an earlier release to avoid the Ribbon) (11.7%, 88 Votes)
No (using an earlier release for other reasons) (5.2%, 39 Votes)
Do you enable CIP (Customer Involvement Program) in your Autodesk products in production?
Start Date: 23 February 2009
Yes, always (17.9%, 74 Votes)
Yes, on some products/releases (8.9%, 37 Votes)
No, because of privacy concerns (30.4%, 126 Votes)
No, because of performance concers (19.3%, 80 Votes)
No, it is not available for me (3.4%, 14 Votes)
No, other (20%, 83 Votes)
AutoCAD 2009 users: pull-down menus – is your menu bar turned on (MENUBAR=1)?
Start Date: 28 November 2008
Yes, it’s on all the time (68.3%, 136 Votes)
Yes, it’s usually on but I sometimes turn it off (6.5%, 13 Votes)
Yes in verticals, no in AutoCAD (2.5%, 5 Votes)
Yes (other) (2%, 4 Votes)
No, it’s usually off but I sometimes turn it on (2%, 4 Votes)
No, I use the menu under the big red A (6.5%, 13 Votes)
No, I never use pull-downs (9.5%, 19 Votes)
No (other) (2.5%, 5 Votes)
Choose the best things about AutoCAD 2009 (up to 3)
Start Date: 11 July 2008
Ribbon (10.8%, 4 Votes)
Menu Browser (5.4%, 2 Votes)
Quick Access Toolbar (5.4%, 2 Votes)
Smaller floating toolbars (8.1%, 3 Votes)
Status bar changes (8.1%, 3 Votes)
Action Recorder (18.9%, 7 Votes)
Modeless layer interface (18.9%, 7 Votes)
Quick View Layouts/Drawings (8.1%, 3 Votes)
Quick Properties (13.5%, 5 Votes)
Spell checking in text editor (29.7%, 11 Votes)
Rollover tooltips for objects (13.5%, 5 Votes)
Enlarged tooltips for user interface (0%, 0 Votes)
ViewCube (21.6%, 8 Votes)
Steering Wheel (2.7%, 1 Votes)
ShowMotion (0%, 0 Votes)
Geographic Location (2.7%, 1 Votes)
DWFx (5.4%, 2 Votes)
Off-white model space background (0%, 0 Votes)
Drawing recovery changes (8.1%, 3 Votes)
Updated button images (2.7%, 1 Votes)
LISP bug fixes (13.5%, 5 Votes)
Scale List bug fixes (10.8%, 4 Votes)
Other bug fixes (10.8%, 4 Votes)
Improvements available only in vertical products (16.2%, 6 Votes)
Other improvements in base AutoCAD (8.1%, 3 Votes)
AutoCAD 2009 non-Ribbon users: why don’t you use it?
Start Date: 20 June 2008
Uses up too much screen space (63.6%, 35 Votes)
Doesn’t make good use of my screen size/shape (45.5%, 25 Votes)
Using it minimised requires an extra click/hover (47.3%, 26 Votes)
Tab concept means extra clicks (65.5%, 36 Votes)
Dislike concept of hiding tools – want buttons to stay visible (60%, 33 Votes)
Tab switching is too slow (45.5%, 25 Votes)
Button click reaction is too slow (38.2%, 21 Votes)
Turning it off saves startup time (30.9%, 17 Votes)
Ribbon content doesn’t match my needs (43.6%, 24 Votes)
All the commands should be on it (27.3%, 15 Votes)
Express Tools are missing (32.7%, 18 Votes)
Other things I use frequently are missing (40%, 22 Votes)
Too hard to find things (50.9%, 28 Votes)
No advantage over existing methods (63.6%, 35 Votes)
Customising it is too difficult (43.6%, 24 Votes)
Don’t like the colour scheme (16.4%, 9 Votes)
Don’t like fuzzy text (ClearType) (25.5%, 14 Votes)
Using a vertical product that doesn’t make use of the Ribbon (23.6%, 13 Votes)
Want to avoid training expense/inconvenience (18.2%, 10 Votes)
Want to avoid initial productivity reduction (18.2%, 10 Votes)
Inconsistent with other programs we use (e.g. Office pre-2007) (12.7%, 7 Votes)
Opposition to Microsoft’s influence (23.6%, 13 Votes)
I’m a Luddite and resist change for the sake of it (7.3%, 4 Votes)
AutoCAD 2009 users: in what state do you usually have your Ribbon?
Start Date: 28 May 2008
Horizontal and fully visible (10.4%, 8 Votes)
Horizontal and minimised to panel titles (5.2%, 4 Votes)
Horizontal and minimised to tabs (7.8%, 6 Votes)
Vertical, floating and fully visible (1.3%, 1 Votes)
Vertical, floating and auto-hiding (0%, 0 Votes)
Vertical, docked and fully visible (1.3%, 1 Votes)
Vertical, docked and auto-hiding (Anchor left or right) (2.6%, 2 Votes)
Turned off (71.4%, 55 Votes)
Related
