Bloatware – a tale of two installations

In a previous post, I showed that AutoCAD is bloatware by comparing the size of its downloads to that of BricsCAD. Obviously, an application that’s ten times the size it should be is going to cost you a lot of unnecessary bandwidth, download time and drive space. But maybe you don’t care about that. What practical difference does it make?

Well, for one thing, the blimping-out of Autodesk’s former flagship product has a big effect on installation time. Vast and ever-increasing amounts of time are wasted by users of Autodesk products, just waiting for the things to finish installing. But isn’t this just the inevitable price to pay for the functionality provided?

No. Again, BricsCAD proves it.

The installation comparison is shown below. These installations were performed on a mid-range Windows 10 i7 PC with 8 GB RAM. The downloaded files were executed from a local hard drive …

Full post

Simplifying CAD Management the Autodesk way

According to Autodesk, one of the benefits of subscription (rental) is simplified administration. To prove it, Autodesk has provided a simple guide for CAD Managers called The Software Administrator’s Guide to Autodesk Subscriptions – How to Set Up, Install, and Manage Your Software and Users.

It’s 18.7 MB and 78 pages long.

Don’t worry though, this simple guide helpfully includes a simple guide on how to read it.

Among other things, this eBook provides handy hints on how subscription’s simplified administration regime for standalone licenses requires you to pre-emptively name all your users, set them all up with Autodesk accounts and define what software each is allowed to use. There’s a note to say that your Internet connection needs to be working at the time of installation (obviously) and also every 30 days (less obvious) or you won’t be able to use the software.

The guide …

Full post

Bloatware – a tale of two CAD applications

You may have seen me mention in passing that AutoCAD is bloatware. That’s not just the general grumpy-old-user moan you see from long-term users like me, who can remember when AutoCAD used to fit on one floppy disk.

Yes, programs get bigger over time as new functionality is added and old functionality needs to be retained. Hardware gets bigger, better, faster over time to compensate for that. I get that. Understood.

The AutoCAD bloatware problem is much more than that. AutoCAD is literally ten times the size it needs to be, to provide the functionality it does.

How do I know? BricsCAD proves it. Here’s what I mean.

BricsCAD V17.2 64-bit Windows Download

Downloaded File Size (KB) BricsCAD-V17.2.03-1-en_US(x64).msi 248,812 Total (1 file) 248,812 (100%)

Equivalent AutoCAD 2018 Downloads

Downloaded File Size (KB) AutoCAD_2018_English_Win_64bit_dlm_001_002.sfx.exe 2,065,829 AutoCAD_2018_English_Win_64bit_dlm_002_002.sfx.exe 328,277 AutoCAD_2018.0.1_64bit_r2.exe 120,663 AutoCAD_2018_Product_Help_English_Win_32_64bit_dlm.sfx.exe 180,013 Total (4 files) 2,694,782 (1083%)

Which dog is which? They’re both …

Full post

Installation tip – save time and space

If you download AutoCAD or other Autodesk products from either the trial or Subscription sites, the executable you get (e.g. AutoCAD_2012_English_Win_32bit.exe) is actually a self-extracting archive rather than a real installer. When you run it, you are prompted for a destination folder, with a default location such as this:

C:\Autodesk\AutoCAD_2012_English_Win_32bit

The actual installer (setup.exe) and all of the files it needs are then unzipped and placed in a folder structure in that location. When the extraction is finished, the self-extracting executable automatically runs setup.exe and the installation proper can begin. Once the installation is complete, the extracted files are left in place.

You can take advantage of this simple knowledge in various ways:

  • Sometimes, you may you need to run the installer more than once on the same PC. For example, you might need to uninstall/reinstall AutoCAD, or you might be a CAD Manager who installs AutoCAD for on your …

    Full post

ClassicArray Release Candidate – massive download bloat

I have just posted the Release Candidate of ClassicArray™ (version number 0.6.0). The main changes from Beta 2 (0.5.0) are:

  • Setup executables have been provided to provide easier installation and uninstallation.
  • Pretty comprehensive Help documentation is now in place, which you can also view here if you want to learn about the product without installing it.
  • Bug fixed with Path preview not displaying accurately when no path is selected.
  • Minor cosmetic dialog box fixes.
  • Timebomb has been moved on 7 days to 28 April.

Regrettably, the download file size has blown out to 787 KB because of the inclusion of the Help files and setup executables. There are two setup choices; one for all users (requires admin rights) and one for the current user only (admin rights not required). When installing the Release Candidate, it is not necessary to uninstall the Beta first. I would appreciate any …

Full post

AutoCAD 2012 – Massive download bloat

Note: this post is not an April fool’s joke. It may be ridiculous and hard to believe, but unfortunately it’s all true.

After I managed to overcome Autodesk’s obstructive download manger and download AutoCAD 2012, it became available on the Subscription site (when that site wasn’t running unusably slowly). Or it became kind-of available. Here’s what is actually available:

  • AutoCAD 2012 Multilingual 32 bit
    Download File Size: 2,080,558,319 bytes (1,984.2 MB)
  • AutoCAD 2012 English Korean Traditional-Chinese Simplified-Chinese Win 64bit
    Download File Size: 2,240,915,999 bytes (2,137.1 MB)

These file sizes are roughly double those of the AutoCAD 2012 English files I’ve already downloaded from the trial page and installed. The 32-bit English file is 1,144,011,680 bytes, or 55% of the size of what the Subscription site is trying to offer me.

Why? Because the Subscription downloads contain three bonus Asian language packs. It has …

Full post