Tag: <span>Interview</span>

Tag: Interview

Autodesk, BricsCAD, Bricsys, Interview, Rental, Subscription

The big Bricsys interview 4 – thank you, Autodesk

 , , , , , , , itemprop="discussionURL"0

This is one of a series of posts covering an extensive interview with Bricsys CEO Erik De Keyser and COO Mark Van Den Bergh. In this post, we learn that Autodesk’s move to all-rental has helped drive BricsCAD sales higher and continues to do so. Cyrena: Backing up just a step to sales, were you able to track any impact on your sales numbers with the chronology of Autodesk’s announcements of ending perpetual? Did you see an effect that you could map to that? Erik/Mark (together): Yes. Erik: We see that especially with large companies. I hear it from Mark …

Autodesk, BricsCAD, Bricsys, Interview

The big Bricsys interview 3 – looking after people

 , , , , itemprop="discussionURL"4

This is one of a series of posts covering an extensive interview with Bricsys CEO Erik De Keyser and COO Mark Van Den Bergh. In this post, I learn about Bricsys’ astonishingly good staff retention record and the reasons behind it. Autodesk likes to periodically pat itself on the back for being a great employer, but history shows it’s a company that discards about 10% of its workforce every few years to keep the share market happy. I suspect another round is coming up soon, unfortunately. There’s a stark contrast between a company that disposes of its chattels in that …

BricsCAD, Bricsys, Interview

The big Bricsys interview 2 – making money

 , , , , , itemprop="discussionURL"0

This is one of a series of posts covering an extensive interview with Bricsys CEO Erik De Keyser and COO Mark Van Den Bergh. In this post, I ask about Bricsys’ profitability and growth. Steve: Do you publish your numbers? Erik: No we don’t. We are a private company. Steve: Can you give us an indication of what’s happening with your sales at the moment? Erik: Last year we grew in revenue 25%. First quarter this year was up 27% over the same quarter last year. If you compare the sales in total of 2016 compared with 2015, it was …

BricsCAD, Bricsys, Cadalyst, Interview, Other Blogs

The big Bricsys interview 1 – why invite the press?

 , , , , , , itemprop="discussionURL"0

This is the first in a series of posts covering an extensive interview with Bricsys CEO Erik De Keyser and COO Mark Van Den Bergh. On April 26 and 27, I attended Bricsys Insights, a press event in Ghent, Belgium. Other attendees included Cyrena Respini-Irwin (Cadalyst editor in chief), R.K. McSwain (CAD Panacea), Ralph Grabowski (upFront.eZine), Randall Newton (GraphicSpeak), Roopinder Tara (Engineering.com), Martyn Day (DEVELOP3D), Jeff Rowe (AEC Café), Anthony Frausto-Robledo (Architosh) and Paul Wilkinson (pwcom). Although Bricsys has invited some of these people (including myself) to previous events, this was the first gathering of such a significant number of …

Autodesk

Carl cashing in his chips

 , , , , itemprop="discussionURL"4

Here’s an interesting Carl Bass exit interview with Roopinder Tara at engineering.com. If you’re wondering just how much stock Carl offloaded in those planned sales, here are his reported sales of Autodesk stock in the weeks leading up to the resignation: 11 Jan 2017 $7,894,150 9 Jan 2017 $7,888,768 5 Jan 2017 $7,694,038 23 Dec 2016 $1,971,715 22 Dec 2016 $1,968,935 That’s $27m, give or take. Carl’s reported as having sold over $49m of Autodesk stock over the last three years. While Carl still has tens of millions of Autodesk stock, dumping that much of it before leaving doesn’t strike …

AutoCAD, AutoCAD WS, Autodesk, Cloud, Interview, Other Autodesk Products, Web Stuff

Autodesk Cloud interview May 2010 – Part 3

 , , , itemprop="discussionURL"0

Steve: Another issue I have with Cloud-based environments is the lack of customisation. One of the things that makes AutoCAD so efficient for people is that they can get it exactly the way they want it. With a browser-based environment, we’re pretty much stuck with what you guys decide to give us. Can you see any solution to that in the longer term? Tal: From a pure technical point of view, there’s not a lot of difference in terms of the way you can customise an application on the desktop versus customising it on the web. I think AutoCAD, having …

AutoCAD, AutoCAD WS, Autodesk, Cloud, Interview, Other Autodesk Products, Web Stuff

Autodesk Cloud interview May 2010 – Part 2

 , , , itemprop="discussionURL"2

Steve: Autodesk is currently giving away these Cloud-based services, Butterfly for example. Presumably you’re not going to keep doing that for ever. Are you going to start charging for these services eventually? Guri: Again, you’re pushing us to talk about future. Currently, for as long as this is in a Labs environment, we’re encouraging users to use it and we’re giving it free in the Labs environment and we’re not putting any limits on it during the Labs experiment. Once we make it a commercial product we may change that. Steve: I put a poll on my blog asking readers …

AutoCAD, AutoCAD WS, Autodesk, Cloud, Interview, Other Autodesk Products, Web Stuff

Autodesk Cloud interview May 2010 – Part 1

 , , , itemprop="discussionURL"0

On 26 May 2010, I had the opportunity to ask Autodesk some questions about the Cloud in general and what was then Project Butterfly (now AutoCAD WS) in particular. The Autodesk people were: Guri Stark,Vice President, AutoCAD & Platform Products Tal Weiss, R&D Center Manager (Israel) Noah Cole, Corporate Media Relations The interview was conducted by phone conference with no prior notice of the questions. Here is the first part of the interview, which I will be posting in three sections. Steve: Guri, are you responsible for all of Autodesk’s Cloud-based offerings? Guri: Tal and I are responsible for Butterfly, …

AutoCAD WS, Autodesk, Cloud, Web Stuff

Cloud benefits – collaboration, with Autodesk’s Tal Weiss

 , , , itemprop="discussionURL"0

In May 2010 I took part in a phone conference with several Autodesk people about the Cloud. Part of that discussion was in the form of an interview, which I will publish in later posts. Another part was in the form of a verbal presentation from Autodesk’s Tal Weiss, concentrating on what was then Project Butterfly, Autodesk’s then Labs-based Cloudy CAD offering. This product had been called Visual Tao and was later renamed again to AutoCAD WS. As this presentation was largely based on the benefits of the Cloud for CAD collaboration, I think it is worthwhile reproducing it here. …

Autodesk, Fail, Interview, Spin, Subscription

Not answering the question

 , , , itemprop="discussionURL"17

Here in Australia, we’re in election mode, so I have even more reasons to avoid watching TV. On those occasions when I do watch it, I am often annoyed by what I see. This is not a novel observation, but one of the things that annoys me about many politicians is their habit of sidestepping questions when interviewed. It also annoys me when interviewers fail to follow up these non-answers and let them slide. Depending on the circumstances (e.g. limited timeframe, more important questions to ask, etc.), there may be valid reasons for journalists failing to chase after legitimate answers …

Autodesk, Comments, Customer Service, Interview, Subscription

Autodesk’s Callan Carpenter responds to Subscription follow-up

 , , itemprop="discussionURL"5

You may remember a month ago I raised the question What proportion of Autodesk customers really are on Subscription? Shortly after that, I sent Autodesk Subscription VP Callan Carpenter these questions following up on the interview: I have a request for follow-up information arising from this interview. I hope you can find the time to provide some answers. Preamble: Several people have called into doubt your assertion that the simplified upgrade policy affects only a tiny minority of your customers (you seemed to imply a figure of around 3% non-Subscription customers, with 1.5% who upgrade within a year or two). …

Autodesk, Interview, Polls, Subscription

Callan Carpenter interview 5 – the 12 month cycle

 , , , , , , itemprop="discussionURL"2

This 5th post concludes the Callan Carpenter interview series. For the record, this interview was done in real time over the phone, with no prior notice of the questions. SJ: The 12-month cycle that you have for most of your software has come under some criticism from all sorts of people, especially me. Once you have your customer base practically all on Subscription, what’s the incentive for the 12-month cycle to persist? CC: In what way have you criticised the 12 month cycle? SJ: In that it damages the product. In that there’s not enough time to release a properly …

Autodesk, Interview, Subscription

Callan Carpenter interview 4 – enhancing the program

 , , , , , itemprop="discussionURL"1

Part 4 of 5 in this series. SJ: There is always the fear that once you have all of your customer base on Subscription, you’re not going to need to offer those benefits any more. Can you assure people that that’s not going to be the case, that you are going to keep being “nice” to your customers? CC: Absolutely. I think my team and I spend as much time and brain energy trying to figure out how to enhance the program as anything else. Our goal is to make Subscription a compelling value proposition; to make it not only …

Autodesk, Interview, Spin, Subscription

Callan Carpenter interview 3 – the cost of complexity

 , , , , , itemprop="discussionURL"2

Part 3 of 5 in this series. SJ: In one of my blog posts, I was pretty cynical about one of the phrases used in the press release: “the streamlining of upgrade pricing based on feedback from customers and resellers”. Was I wrong to be cynical about that? Did your customers really ask for upgrade prices to be increased to some nice round number? CC: What our customers have asked for is simplified purchasing. We have a very complex price book and it leads to thousands of prices items, maybe tens of thousands when you have all the permutations across …

Autodesk, Interview, Subscription

Callan Carpenter interview 2 – upgrades a tiny minority

 , , , , , itemprop="discussionURL"5

Part 2 of 5 in this series. SJ: Is there anything specific you want to say about what I have written in my blog? CC: There are a number of things we can do to put Subscription questions and Simplified Upgrade Pricing into context. I think the first thing we need to recognise is that there is a very small fraction of our revenue that comes from upgrades at this point in time. For the last 8 years or so, our customers have fairly well self-selected to either prefer to be on Subscription and have the latest version and technology …

Autodesk, Interview, Other Blogs, Subscription

Callan Carpenter interview 1 – Autodesk and social media

 , , , , , itemprop="discussionURL"0

A couple of weeks ago, Angela Simoes from the Autodesk Corporate PR team invited me to interview Callan Carpenter, Autodesk’s Vice President of Global Subscription and Support. Callan is responsible for the sales, marketing operations and product support associated with Subscription. He is also Vice President in charge of Jim Quanci’s Autodesk Developer Network. This morning, we had a very extensive discussion about Subscription and other topics that I intend to publish in several parts over the next few days. Deelip has already published a Callan interview, but mine is quite different. In this post, I will let Callan introduce …

AutoCAD 2010, Autodesk, Fun, Interview, Other Blogs, Video

A gaggle of geeks

 , , , , , , , , , , , , , , , , , , , , itemprop="discussionURL"6

Time to lighten things up a bit, I think. While attending the AutoCAD 2010 product launch in San Francisco on 5 February 2009, I conducted a series of micro-interviews with a collection of AutoCAD bloggers and Autodesk employees. One geek asks 14 other geeks if they are geeks; nothing too serious here. I hope Shaan enjoys my tabloid journalist editing job right at the end. YouTube link. Thanks to all the interviewees: Heidi Hewett, Autodesk blogger Lynn Allen, Autodesk blogger Melanie Perry, blogger Robin Capper, blogger Brian Benton, blogger Todd Shackelford, blogger Jon Page, Autodesk person Matt Stein, Autodesk person …

AutoCAD 2010, Autodesk, Customer Service, Interview, Video

Autodesk not listening? The response, part 1.

 , , , , , itemprop="discussionURL"5

While attending the AutoCAD 2010 launch today, I took the opportunity to interview three Autodesk people: Eric Stover, Jon Page and Shaan Hurley. I raised the issue of Autodesk being seen as not listening to its customers, and was given a very comprehensive response. Here is the first of two parts of that interview. YouTube link. Disclosure: Transport, accommodation and some meals were provided by Autodesk.

AutoCAD, Autodesk, Comments, Development, Interview

(Don’t) Ask Autodesk a question

 , , , , itemprop="discussionURL"32

If you had a real live Autodesk development person standing in front of you right now (an AutoCAD Product Manager, for example) and were allowed to ask one question, what would it be? Please add a comment here with your question. I would ask that you keep your question civil and reasonably concise (one or two sentences), and bear in mind that the development person in front of you isn’t going to have a useful answer to policy questions about pricing, license agreements, customer service and so on. Other than that, anything goes, so let’s have ’em. I can’t promise …